医用内窥镜是一种常用的医疗器械，由可弯曲部分、光源及一组镜头组成。经人体的天然孔道，或是经过手术做的小切口进入人体体内。那么您知道内窥镜设备的相关参数及故障包含什么吗？下面内窥镜设备维修人员给您讲解。

Medical endoscope is a commonly used medical instrument, which consists of a flexible part, a light source and a group of lenses. It enters the human body through natural channels or small incisions made by surgery. Do you know what the relevant parameters and faults of the endoscope equipment include? The endoscope equipment maintenance personnel will explain to you below.

（1）光源系统常见的故障

(1) Common faults of light source system

光线发暗。排除了是光栅遮挡的原因外，基本可以肯定是灯泡接近使用寿命，更换新灯泡则可。氙光灯泡的使用寿命一般设计在500小时，如果光源系统有寿命计时装置，这个问题就很容易解决。

The light is dim. It is ruled out that the light bulb is close to its service life, and it can be replaced with a new light bulb. The service life of xenon light bulb is generally designed to be 500 hours. If the light source system has a life timer, this problem can be easily solved.

开机灯泡不亮。如果排除了烧掉灯泡这个原因的话，那么问题常常就出在主机高压点火电路部分，因为开机的时候机器会产生上万伏特的脉冲高压，元件会老化得特别快。注意此时不能用万用表去检查脉冲高压。

The power on bulb does not light up. If the reason of burning out the bulb is ruled out, the problem is often in the high-voltage ignition circuit of the host, because the machine will generate tens of thousands of volts of pulse high voltage when it is turned on, and the components will age very quickly. Note that you cannot use a multimeter to check the pulse high voltage at this time.

（2）人工气腹系统常见的故障

(2) Common faults of artificial pneumoperitoneum system

压力显示不正确。这多是气体压力传感器损坏，如果机器设计有一组多个压差压力传感器同时工作的，一般一个老化或者污染无法工作的时候，我们要把这组传感器全部更换，否则只换其中一个，其他的同组的传感器寿命也接近临界了。

The pressure display is incorrect. This is mostly due to the damage of gas pressure sensors. If the machine is designed to have a group of multiple differential pressure sensors working at the same time, generally when one of them is aging or polluted and cannot work, we should replace all of these sensors, otherwise only one of them will be replaced, and the life of other sensors of the same group will also be near the critical point.

流量不准确。气体流量传感器损坏更换即可。有时候是通过压差来计算流量的，这时候我们就要更换新的压差传感器。

The flow is not accurate. If the gas flow sensor is damaged, replace it. Sometimes the flow is calculated by differential pressure. At this time, we need to replace a new differential pressure sensor.

设备漏气。很多情况是器械密封圈老化而引起的。但也有设备机械减压阀漏气和电磁阀损坏的原因，这个比较容易判断出并对其进行修复。

The equipment leaks air. Many cases are caused by the aging of the device sealing ring. However, there are also reasons for leakage of mechanical pressure reducing valve and damage of solenoid valve, which can be easily identified and repaired.

（3）液体加压系统常见的故障

(3) Common faults of liquid pressurizing system

蠕动泵损坏。

Peristaltic pump is damaged.

液体压力传感器损坏。其原理基本与气体压力传感器相同。

The liquid pressure sensor is damaged. Its principle is basically the same as that of the gas pressure sensor.

设备内部电路损坏。

The internal circuit of the equipment is damaged.

（4）电凝电切系统常见的故障

(4) Common faults of electric coagulation and electric cutting system

设备配件损坏。如脚踏开关，负极板导线，连接导线等常用的易损配件。

The equipment accessories are damaged. Such as foot switch, negative plate wire, connecting wire and other commonly used vulnerable accessories.

电切、电凝，双极故障。在设备内部，这些部分都由不同的电路模块组成。我们可以根据其表现的故障现象对相应的模块电路进行维修或更换。

Electric cutting, electrocoagulation, bipolar fault. Inside the equipment, these parts are composed of different circuit modules. We can repair or replace the corresponding module circuit according to the fault phenomenon.

如果是设备出问题，应该先采取应急维修，因为这样能解决占故障85%左右的中小故障。而在实际维修的时候难解决的问题是更换配件的订购。更多相关内容就来我们网站http://www.jiangrenyiliao.cn进行咨询了解吧！

If there is a problem with the equipment, emergency maintenance should be carried out first, because this can solve the small and medium faults that account for about 85% of the faults. The problem that is difficult to solve in actual maintenance is the ordering of replacement parts. More relevant content will come to our website http://www.jiangrenyiliao.cn Consult and understand!