内窥镜的使用，日常维护一般由使用科室和操作人员完成.它是一项每天都要进行的工作，应该制度化，它的内容应写进操作规程和注意事项：使用科室应选派1名懂得一定仪器知识，责任心强的技术员担任专职或兼职仪管员，协助和指导操作人员做好这一工作。下面内窥镜维修公司来将讲讲日常维护工作的内容一般包括：

The use and daily maintenance of endoscopes are generally completed by the department and operators. It is a daily task that should be institutionalized, and its content should be included in the operating procedures and precautions. The department should appoint a technician who knows a certain amount of instrument knowledge and has a strong sense of responsibility as a full-time or part-time instrument manager to assist and guide operators in doing this work. Below, the endoscope repair company will discuss the daily maintenance work, which generally includes:

⑴机房及仪器设备的保洁；观察调整机房温度、湿度稳定。

(1) Cleaning of the computer room and instrument equipment; Observe and adjust the stability of the temperature and humidity in the computer room.

⑵检查机器的机械、转动、气路、水路，螺钉、螺母等部位是否正常。

(2) Check whether the machinery, rotation, air circuit, water circuit, screws, nuts and other parts of the machine are normal.

⑶检查仪器表面的开关、旋钮，指示灯、仪表及显示参数是否正常。

⑶ Check whether the switches, knobs, indicator lights, instruments and display parameters on the instrument surface are normal.

⑷正式工作前，利用仪器自检程序检测仪器各部分的状态情况。

Before formal work, use the instrument self inspection program to check the status of each part of the instrument.

⑸注意仪器在运行过程中有否异常气味和声音，图像质量是否正常。

(5) Pay attention to whether the instrument has abnormal smell and sound during operation, and whether the image quality is normal.

⑹检查操作人员操作仪器是否符合规程，并及时纠正。

(6) Check whether the operators operate the instruments in accordance with the regulations and make timely corrections.

由于医用内窥镜是一种侵入式检测工具，因此，使用医用内窥镜的都是进过严格培训和考核的。

Due to the fact that medical endoscopes are an invasive detection tool, those who use them have undergone rigorous training and assessment.

内窥镜故障检修

Endoscope troubleshooting

在组织管理方面：如划分专业组，一专多能；计算仪器复杂系数，合理分担；分科室或仪器到人，包干负责；组织故障会诊；总工程师负责制等。

In terms of organizational management: such as dividing professional groups and having multiple abilities with one specialty; Calculate the complexity coefficient of the instrument and share it reasonably; Assign personnel to different departments or instruments, and be responsible for all responsibilities; Organize fault consultation; Chief engineer responsibility system, etc.

在人才培养方面：如引进和培养相结合，逐步形成人才梯队，在职提高和外送培训相结合，基础理论深入和专业技术提高相结合等。

In terms of talent cultivation, such as combining introduction and cultivation, gradually forming a talent echelon, combining on-the-job improvement with external training, and combining basic theory deepening with professional technology improvement.

在维修程序方面：先了解仪器故障起因，熟悉仪器的工作原理，然后运用自己掌握的基础理论知识针对仪器的电路图分析故障产生的可能部位，逐步检测排查，从中找出故障的真正部位，后修复或更换故障部件，并完成局部或整机调试。

In terms of maintenance procedures: First, understand the cause of the instrument malfunction, familiarize oneself with the working principle of the instrument, and then use the basic theoretical knowledge mastered by oneself to analyze the possible parts of the malfunction based on the circuit diagram of the instrument, gradually detect and troubleshoot, identify the true part of the malfunction, repair or replace the faulty component, and complete local or complete machine debugging.

维修方法：应遵循先询问，后诊断；先直观，后测查；先全面，后局部：先传动，后电路；先独立，后整机；先外围，后芯片；先控制，后数据；先定性，后定量等辩证关系的原则。

Maintenance method: First inquire, then diagnose; First intuitive, then testing; First comprehensive, then partial: first transmission, then circuit; First independent, then complete; First peripheral, then chip; Control first, then data; The principle of dialectical relationships such as qualitative analysis and quantitative analysis.

故障部位一般机械部分比电路部分多；强电部位比弱电部位多；高温部分比低温部分多；电源部分比主体部分多，传动部位比静止部位多，按插部位比固定部仿多，阻容器件比半导体器件多，模拟电路比数字电路多等客观规律，检测方法有敲击法、直观法、测量法、比较法，替换法、变温法，信号追踪法、信号输入法、前后合追法、负载分离法等实用方法。更多相关事项就来我们网站http://www.jiangrenyiliao.cn咨询吧！

Generally, there are more mechanical parts than circuit parts at the fault location; There are more strong electrical parts than weak electrical parts; There are more high-temperature parts than low-temperature parts; The power supply part is more than the main part, the transmission part is more than the static part, the insertion part is more than the fixed part, the resistance capacitance device is more than the semiconductor device, the analog circuit is more than the digital circuit, and other objective laws. The detection methods include knock method, visual method, measurement method, Comparative law, replacement method, temperature change method, signal tracking method, signal input method, front and back tracking method, load separation method and other practical methods. For more related matters, come to our website http://www.jiangrenyiliao.cn Consult!