大家好！我是匠仁医疗的小编，今天给大家介绍一下工业内窥镜在使用操作上要注意的一些细节。

hello everyone! Today, I'd like to introduce you to some details of the operation of the industrial endoscope.

一我们要了解检测工件的内部结构特点、检测具体内容、位置，按程序展开相关链接仪器，检查电源、接地是否可靠、仪器位置安全平稳。

First, we need to understand the internal structure characteristics of the test workpiece, the specific content and location of the test, expand the relevant link instrument according to the program, and check whether the power supply and grounding are reliable, and whether the position of the instrument is safe and stable.

二是选择合适的探头、镜头及进入产品的通道，检测前应清楚通道内的障碍、毛刺等可能阻碍、损伤探头的物体。

The probe, burr, and other obstacles should be clear.

三是对于一些内部无法了解或结构复杂的产品，可使用观察镜头观察后再进行检测，检测中尽量使镜头正对检测区域。

Third, for some products that cannot be understood internally or with complex structure, the observation lens can be used to observe and then detect. During the detection, the lens should be facing the detection area as far as possible.

四是检测前应使眼睛适应检测环境及光浅、长时间工作时应注意避免眼睛疲劳，产生人为漏检。

Fourth, the eyes should be adapted to the testing environment and light before testing, and attention should be paid to avoid eye fatigue and artificial omission when working for a long time.

五是检测过程中应小心，确保探头顺利到达指定部位、探头在推进过程中如遇到明显阻力时，应立即停止前进，探头退出时应缓慢，如被卡住不能用力拉，以免损坏工件或探头。

Fifthly, care should be taken in the detection process to ensure that the probe reaches the designated position smoothly. If the probe encounters obvious resistance in the process of propulsion, it should stop advancing immediately. When the probe exits, it should be slow. If it is stuck, it cannot be pulled with force, so as to avoid damaging the workpiece or probe.
                            

六是对采集的图像进行处理分析。

The sixth is to process and analyze the collected images.

七是按规定清洁探头，整理仪器、现场。

The seventh is to clean the probe, arrange the instrument and the scene according to the regulations.

八是推荐工作人员可使用辅助工装帮助探头顺利到达位置。

Eighth, it is recommended that the staff can use the auxiliary tooling to help the probe reach the position smoothly.

九是使用工业内窥镜设备包括工业内窥镜及探头的类型、直径、型号，工业内窥镜测量的位置及精度。

The ninth is the use of industrial endoscope equipment, including the type, diameter and model of industrial endoscope and probe, the position and accuracy of industrial endoscope measurement.

十是检测报告要求。

Ten is the requirement of test report.

感谢您的阅读，希望以上内容对您有所帮助，如您想了解更多精彩内容请点击我们的官网：内窥镜设备维修http://www.jiangrenyiliao.cn。

Thank you for reading, hope the above content is helpful to you, if you want to know more wonderful content, please click our official website: endoscopic equipment maintenance http://www.jiangrenyiliao.cn .